Instructions
Making The Frame
- 1 Measure, mark and cut out a rectangle 9 inches long by 6 inches wide on a piece of plywood.
2 Cut two 9-inch lengths of 1-by-1-inch timber and nail it in place, one piece along each other, along the edge of the plywood catapult platform.
3 Measure and mark 4 1/2 inches along both the long sides. Cut two 3-inch lengths of the 1-by-1-inch lumber. Nail one securely in place inside the wood youve nailed to the plywood, with one edge of the wood up against the mark. Repeat the process on the other side, making sure the wood butts up against the mark.
4 Cut a 2 inch piece of 1-by-1-inch lumber. Fit it snugly between the uprights youve just put in place and nail it in place so its flush with the top of the uprights. On the half of the platform without the uprights, measure along 1/2 inch from the upright along the side piece, and 1/2 inch up from the platform, and mark, and repeat the process on the other side.
5 Turn the catapult frame over and measure in 2 inches from each end, and mark it. Staple the axles in place on the platform to make the undercarriage.
Completing The Catapult
- 6 Fit a one-fourth-inch bit to the drill and drill through the wood side frame on the catapult platform at the marks you made by the uprights.
7 Poke a heavy rubber band through one of the holes and hold in place with a nail through the loop in the band outside the frame.
8 Twist the rubber band several times to increase the tension on it, and poke through the other hole and hold it in place with a nail through the loop of the rubber band.
9 Take a teaspoon and work the end of the handle through one of the twists in the middle of the rubber band. Pull the spoon back to the platform and release so that the spoon makes an arc, but is stopped by the bar across the uprights.
10 Hammer two small nails into the edge of the plywood on either side of the teaspoon. Knot twine around one. Hold the spoon against the uprights and tie the twine to the spoon where the handle meets the spoon. Leave a length of string behind that to pull back the spoon catapult and tie around the other nail. Pull the spoon back, put a marshmallow in it and release.
How to build a catapult - StormTheCastle.com
www.stormthecastle.com/catapult/how-to-build-a-catapult.htm
This is a tiny replica of the massive siege engines that were used to tear down castle walls in the Middle Ages. You can make one of these catapults with just ...How to Build a Catapult - glassvisage on HubPages
glassvisage.hubpages.com Outdoor Games
A catapult, huh? You've been watching an old cartoon with the apparatus involved? Yeah, they can be pretty fun and interesting, but now you want to make one, for ...Making Throwing a Greek Roman Amphora vase potters wheel demo how ...
www.youtube.com/watch?v=x1RvYQJneRE
Ingleton Pottery http://www.ingletonpottery.co.uk My 1st attempt at making a greek or roman designed amphora vase on the wheel. Making a Greek / Roman ...How to Make a Mini Catapult eHow
www.ehow.com Crafts Other Craft Projects
Mini catapults can be fun toys. The easiest one to make involves simply leveraging a spoon with your hands. While this works in a pinch, you can make another mini ...How to Build a Catapult Out of Popsicle Sticks - Teaching Boys
teachingboys.net/2012/09/27/how-to-build-a-catapult-out-of...
When I looked over our Classical Conversations presentation schedule, I noticed that next weeks presentation is How to Make/Do Something.Roman Costume History How to Make a Roman Toga & Tunic ...
www.fashion-era.com/ancient_costume/roman-costume-history-toga.htm
Roman Costume History. How to make a Roman toga and tunic. Fancy dress tips for making a Roman costume. Patterns for Roman hairstyles for women. Dignitaries had the ...Ancient Greek Artillery Technology: From Catapults to the ...
www.mlahanas.de/Greeks/war/CatapultTypes.htm
Torsion based Artillery. The principle of torsion was probably discovered by artificers working in Macedonia under Philip II and Polyidus between 353 and 341 BC.How to Make a Catapult for Kids eHow
www.ehow.com Crafts Other Craft Projects
You May Also Like. How to Make a Catapult for Kids Using Pencils. Catapults were used at least since ancient Roman times as a powerful weapon designed to launch ...How to Make a small Torsion Catapult called a Mangonel
www.stormthecastle.com/catapult/how-to-make-a-small-torsion...
Full Plans, instructions and videos on how to make a small torsion catapult. Also called a Mangonel. This is an easy project and doesn't take a lot of time or a lot ...
No comments:
Post a Comment